WINDSHIELD CRACK REPAIR TOOL PARTS

 The Ultra Bond CrackMaster Wonder Bar gives you seven different tools. It can be configured into different tools by moving bolts and suction cups. One Wonder Bar can be a: long crack sliding tool crack-opener low pressure stone-damage..

The Ultra Bond Crack Master two Wonder Bar gives you seven different tools. It can be configured into different tools by moving bolts and suction cups. Two Wonder Bars attached gives you the most effective chip repair tool ever made with a NEW flex and release method...

Cap for the bottom of your injector cylinder to protect your resin, prevent any waste of resin and allow you to go from one repair to the next without reloading.

The Wonder Bar nut goes in the center of the wonder bar. It mates with an assembles every tool except the 3-inch flat chip repair tool.

Two of theses go in the back of the long crack slider wonder bar for leveling and stabilizing.

Make the Star Flexor with this Wonder Bar 1 1/2 inch star flexor bolt. 

Use to assemble two wonder bars into a bridge formation

The bolt that assembles two wonder bars together into a bridge formation with a wonder bar nut.

This is the bolt that flexes stone-breaks open and and closed; controls the pressure (compression) on the glass and the pressure on the resin. 

The 2-inch Soft Suction Cup  is for the two bar chip repair bridge and the long crack slider.



The 2-inch stiff cup is used for the star leg flexors. .



The 3-inch flat suction cup for chip repairs is placed on the flat side of a wonder bar with the washer and nut in the grooved side of the bar.

The White Cylinder Q-Ring (Quad Ring) goes on the end of the cylinder of your injector and ends up against the glass giving you an air-tight seal... 

The Cylinder Q-Ring (Quad Ring) goes on the end of the cylinder of your injector and ends up against the glass giving you an air-tight seal.....

An injector cylinder seal for a larger pit than our Q-ring cylinder seals. Also used as the Seal on the resin bottle tip of 1600 and 2400 edge crack resins for easy injection into the crack.  Pack of 2.

A stand-alone Wonder Bar without the suction cups, nuts or bolts. 

*Note: The Wonder Bar requires the use of suction cups, nuts and bolts. This product is for existing repair businesses who already have the accessories.

This is the Hybrid Windshield Repair Tool grommet seal that goes in the bottom of the Hybrid Injector. It holds the resin and seals against the glass.

This makes the Hybrid Windshield Repair Tool one-of-a-kind. In addition to the typical Grommet seal, it has also has a vacuum seal on the piston for the separate connected vacuum cylinder chamber.