Long Crack Windshield Repair Sliding Structure

Home / Windshield Crack Master Parts / Long Crack Windshield Repair Sliding Structure

This is our Crackmaster Long Crack Repair Structure Slides along so the injector can inject resin into a windshield crack from the surface. The Crackmaster for long cracks is designed so it can slide from the tip/point of the crack to the edge of the windshield. With the stabilizing bolts it is self-leveling and the pressure is controlled so to not push the crack closed as long cracks are surfaced. The pressure bolt allows you to temporarily increase pressure while at the drill hole so you can get our 400 crack resin to fill the tapped bullseye and start into the long crack. A windshield is only 5 mm thick. The outer layer you are repairing is only 2 mm thick. It will flex easily. This tool's design allows for sliding and does not flex the glass so to push the crack closed. Tools used to repair chips have too much pressure and will flex the glass and push the crack closed so that it will under-fill or spot the repair. It boils down to the physics of the tool: length, compression, mechanical advantage, size and durometer of the cups.